Elmo SimplIQ Series Installation Manual page 3

Revision History
Version Date
Ver. 1.0 August 2008
Ver. 1.1
November 2008
Ver. 1.2 May 2009
Ver. 1.3 March 2010
Ver. 1.4 September
2012
Ver. 1.401 January 2013
Ver. 1.402 February 2013
Ver. 1.403 July 2014
Ver. 1.404 October 2017
Details
Initial Release
Correction to J6 & J7 pinout diagrams
MTCR 01-009-41: Clarifications regarding models with
connectors and wires on Notice page (above) and page 17.
Changes to table in Section 3.3.1.
MTCR 01-009-52: Added Section 3.4.3: Motor (Brake, PTC).
MTCR 01-010-05: Notice page (above): The note was
updated, also updated on page 17.
MTCR 04-009-48: Table 2: Pin 2 renamed to PR.
Update to main board
Formatted according to the new template.
"Metronome" was replaced by the "Composer" software.
Updated the Powerful Digital Output Interface table.
Updated the Opto Digital Output Interface table.
Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
General format changes
Updated Warranty Information section 1.5 and updated the
part number label in section 3.2