Table of Contents
Advertisement
6.3
Termination Only FMT Configuration
Cables routed into the FMT for termination only will typically be pre-terminated individual
cables of 2 mm or 3 mm diameter. Refer to the following instructions.
6.3.1
24-Position Termination Only Tray, Universal Entry
Route and install the cables as shown in
KURLY
LOCK
1 FROM BOTH SIDES ROUTE THE FIRST 10 FIBERS DIRECTLY INTO THE
BACK 10 ADAPTERS.
2 FROM BOTH SIDES ROUTE THE NEXT 12 FIBERS AROUND THE EDGE
PROTECTORS (2 FIBERS PER EDGE PROTECTOR) AND INTO THE NEXT
12 ADAPTERS.
3 FROM BOTH SIDES ROUTE THE LAST 2 FIBERS AROUND THE FRONT EDGE
PROTECTORS (2 FIBERS PER EDGE PROTECTOR) AND INTO THE FRONT
2 ADAPTERS.
Figure 9. Cable Routing for 24-Position Termination Only Tray, Universal Entry
ROUTE FIBERS ALONG THE
SOLID ARROW ON INDICATED
PATH, THEN FOLLOW THE
APPROPRIATE DOTTED LINE.
1
2
2
2
3
Figure
9. Place kurly locks at locations indicated.
1
2
ADCP-90-326 • Rev B • November 2020
KURLY
LOCK
2
2
3
20340-A
Page 13
© 2020, CommScope Inc.
Advertisement
Table of Contents
