Attenuators; Termination Only Fmt Configuration - CommScope ADCP-90-326 User Manual

ADCP-90-326 • Rev B • November 2020
RIBBON
BLOCKING
KIT
PLACE OPTIONAL
ATTENUATOR ON THIS
SIDE OF SLIDING
ADAPTER PACK
Figure 8. Routing and Securing Cable - Typical Configuration for Ribbon Cable
6.2

Attenuators

Attenuators decrease the optical power in a fiber by a specific or adjustable amount. Once the
desired level of attenuation is determined, fixed attenuators may be inserted in the fiber optic
line to deliver a precise output. Optional attenuators are installed on tab side of the sliding
adapter packs. See
Page 12
© 2020, CommScope Inc.
CABLE CLAMP
AND MOUNTING
BRACKET
RIBBON
CABLE
Figure 7.
DETAIL OF
CABLE TIE-OFF
POINT
TIE
LANCE
ROUTE PROTECTIVE
TUBING INTO FMT
THROUGH SLIDING
RADIUS LIMITER
CABLE CLAMP
AND MOUNTING
BRACKET
RIBBON
BLOCKING
KIT
20277-A