Temperature Sensor (Cold Aisle) - HP POD 20c Maintenance And Service Manual

Temperature sensor (cold aisle)

The HP POD 20c contains three temperature sensors in the cold aisle.
You need a screwdriver and scissors to remove and replace the cold aisle temperature sensor.
Removing the cold aisle temperature sensor
Remove the four screws that secure the cold aisle temperature sensor cover (1), and then remove the
1.
cover (2).
Label the cold aisle temperature sensor wires or take a picture to remember which wires to reconnect
2.
later.
Disconnect the wires.
3.
Remove the two retaining screws, and then remove the cold-aisle temperature sensor housing from the
4.
wall.
Replacing the cold aisle temperature sensor
Reconnect the wires to the cold-aisle temperature sensor.
1.
Reconnect the wires.
2.
Re-attach the cold-aisle temperature sensor housing to the wall using the two retaining screws.
3.
Removal and replacement procedures 43