Replace the cold-aisle temperature sensor cover (1).
4.
Replace the four screws that secure the cold aisle temperature sensor cover (2).
5.
Temperature sensors (hot aisle)
The HP POD 20c contains three temperature sensors in the hot-aisle.
You need a screwdriver to remove and replace the hot aisle temperature sensors.
Removing the hot aisle temperature sensor
Remove the four screws (1) that secure the hot-aisle temperature sensor cover, and then remove the
1.
cover (2).
Label the hot-aisle temperature sensor wires or take a picture to remember which wires to reconnect
2.
later.
Disconnect the wires.
3.
Removal and replacement procedures 44