Log Settings - Delta DX-2100 Series User Manual

D X-2 100 Se ri es Ind ustr ia l 3G C lo ud Ro u ter
Edit
To edit the parameters or change the setting by clicking on the target field.
3.4.7

Log Settings

This page is used for configuring the log settings, including Log to Console, Remote Log Service, Remote Log Server
Address, and Port of Remote Log Server.
_3
Log to Console
Set up the log to the console port.
Remote Log Service
Enable/disable the remote log service.
Remote Log Server Address
Set up the remote log server address
Port of Remote Log Server
Set up the remote log server port, ranging from 1 to 65534.
Notice

Remote log service is used for qualified engineers to check the device remotely
when errors occurred. With this service, there is no need to log in to the device,
device logs can be exported to the remote log server. The server should support
the syslog protocol. When this functionality is enabled, it will take up some
resources. Do not enable this functionality disabled, unless it's necessary.
3 - 5 2
Description
Description
Defualt
N/A
Default
No
Disable
N/A
514