D X-2 100 Se ri es Ind ustr ia l 3G C lo ud Ro u ter
4.2.4
Users can set Automation Startup for DIACOM, The setting steps see blow.
1.
Login to DIACom.
2.
Click on the icon button
3.
Boot automatically log in the required configuration is as follows. Users can set according to
your needs. If you only need DIACom to connect the security tunnel automatically, the device
list, RS-485 and RS-232 do not need to be set.
_4
4.
Check " Start DIACom on windows logon ", and click "OK" button to save the settings.
4 - 1 4
Automation Startup
in the upper right corner of the windows, and select "Settings".
Notice
Login must be checked "remember password", otherwise DIACom can not be activated
automatically
Confirm that the IP / Serial Port settings do not cause conflicts