Ip Filter - Delta DX-2100 Series User Manual

After clicking the "Add A MAC Address", you will see the following page.
MAC Address
Manually input the MAC address that you'd like to block.
Device Name
Enter the device name corresponding to the set MAC address.
Status
Enable/disable the MAC Filter functionality.
3.3.7

IP Filter

This page is used for setting up the IP Filter, including configuring the Source IP, Source Port, Destination IP, Destination
Port, Protocol and Status.
IP Filter is used to block particular IP address from the local network. Select Enable/Disable to activate/deactivate this
functionality. Click the "Add An IP Address" to block the IP Address.
After clicking the "Add An IP Address", you will see the following page.
Description
Cha p ter 3 In tr od ucti on to F unc tio ns
Default
N/A
N/A
Enabled
3_
3 - 2 5