Emerson CF766LBQ00 Owner's Manual page 22

8. Wall Control Installation
3-WAY WIRING DIAGRAM:
NEW CONSTRUCTION
NOTE: Retrofit 3-way installations are likely to
include two Traveler Wires between the two Wall
Boxes. In new construction, only one Traveler Wire
is required (See Figure 34).
WARNING
!
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
8.14
Screw the Wall Control into Wall Box using the supplied
Screws. Leave the Wall Control in "OFF" mode until
Fan installation is completed.
8.15
The Wall Control is supplied with a White, Ivory, and
Almond color Switch Covers. Choose the finish that
best suits your needs and snap the Cover onto the Wall
Control (Figure 34).
8.16
Next, install the other Wall Control (sold separately) into
the Wall Box containing the Load Wire. Connect the
Black Wire of the Wall Control to the Traveler Wire(s)
already connected to the Black Wire (in the other wall
box). Secure with Wire Connectors, supplied.
8.17
Connect one Black Wire of the Wall Control to the "load"
(black) Wire and secure with Wire Connector, supplied.
8.18
Connect one Black Wire of the Wall Control to both
remaining Traveler Wires in the Wall Box and secure
with Wire Connector, supplied.
(Continued)
STANDARD WIRING FOR EXISTING
3-WAY CONTROLS
WALL CONTROL
HOT BLK
3-WAY WIRING DIAGRAM: RETROFIT
BLK
HOT
....
OFF ON
FAN/LIGHT
WALL
CONTROL
Figure 34
22
EXISTING
TRAVELER
WIRES
BLK BLK
BLK
....
OFF ON
FAN/LIGHT
WALL
TRAVELER
CONTROL
WIRES
SECOND
WALL CONTROL
PURCHASED
SEPARATELY
ETL Model No.: CF766L
LOAD
LOAD