Operation - Victron energy MPPT Control display Manual

4. Operation

The LCD screen displays the following information:
• A number reading.
• The unit of the reading: V, A, W, kWh, h or !
• The type of reading: load, battery, PV, min, max or charge stage.
• Connection status indicator.
The digits used to represent letters and numbers
The connection status of the display is indicated by a "double arrow"
Indicator connection status
There is a connection between the display
On
and the solar charger
There was a connection with the solar
Blinking
charger but the connection is lost. The last
know values will be shown.
There has not been a connection with a
Off
solar charger.
The buttons on the front of the display are used to navigate through the solar charger readings and are used when making solar
controller and display settings.They have the following functions:
Button
Page 7
MPPT Control display manual
Full LCD readout
Action
Cancel
or
Back
Select
or
Confirm
Go to next or previous item
or
Increase or decrease value
symbol as indicated in below table.
Operation