Table of Contents
Advertisement
Table 5. System setup options—Integrated Devices menu (continued)
System Configuration
M.2 PCIe SSD-0/SATA-2
SATA-0
Drive Information
Table 6. System setup options—Storage menu
Storage
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
M.2 PCIe SSD-1
Table 7. System setup options—Display menu
Storage
Display Brightness
Brightness on battery power
Brightness on AC power
Full-Screen Logo
Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTP(s) Boot Feature
HTTP(s) Boot
70
System setup
Default: ON.
Default: ON.
Displays the information of various onboard drives.
Enables or disables onboard drives
Default: ON.
Enables or disables the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting
Technology) option on the system.
Default: OFF.
Provides information about the type and device on the computer.
Sets the screen brightness when the computer is running on battery power.
Sets the screen brightness when the computer is running on AC power.
Displays full screen logo if the image matches screen resolution.
Default: OFF.
Enable or disable internal WLAN/Bluetooth devices.
Default: ON.
Default: ON.
Allows pre-OS and early OS networking features to use any enabled NICs. This
may be used without the PXE turned on.
Default: Selective Enabled.
This platform has HTTP(s) Boot capabilities.
Default: ON.
NOTE:
Provisioning of the Certificate is necessary to connect to HTTPs
Boot server.
Advertisement
Table of Contents
