Table of Contents
Advertisement
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
memory
module.
5. Remove the
M.2 2280 solid-state drive
6. Remove the
M.2 2230 solid-state drive
7. Remove the
wireless
card.
8. Remove the
GPU
fan.
9. Remove the
system
fan.
10. Remove the
heat
sink.
About this task
NOTE:
When removing the system board to replace/access other parts, the system board can be removed and installed
with the heat sink attached in order to simplify the procedure and preserve the thermal bond between the system board
and heat-sink.
The following image indicates the connectors on your system board.
Figure 1. System board connectors
1. Display cable connector
2. Power-adapter port cable connector
3. Keyboard cable connector
4. Keyboard backlit cable connector
5. Touchpad cable connector
6. I/O-board cable connector
7. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
58
Removing and installing components
or
M.2 2230 solid-state drive
from M.2 slot two, if applicable.
from M.2 slot one, whichever applicable.
Advertisement
Table of Contents
