Table of Contents
Advertisement
Table 4. System setup options—Boot Configuration menu (continued)
Boot options
Custom Mode Key Management
Advanced Boot Options
Enable UEFI Network Stack
Table 5. System setup options—Integrated Devices menu
System Configuration
HDD Fans
Date/Time
Date
Time
Camera
Enable Camera
Enable Audio
Enable Microphone
Enable Internal Speaker
USB/Thunderbolt Configuration
Enable External USB Ports
Enable USB Boot Support
Enable Thunderbolt Boot Support
Enable Thunderbolt (and PCIE behind
TBT) pre-boot modules
Video/Power only on Type-C Ports
SATA Operation
Drives
Default: PK.
Enables or disables UEFI Network Stack.
Default: PK
Configures which HDD fans are populated in the sytem.
Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Enables or disables the camera
Default: ON.
Enables or disables all integrated audio controller.
Default: ON.
Enables or disables microphone.
Default: ON.
Enables or disables internal speaker.
Default: ON.
Enables or disables USB ports to be functional in an operating system
environment.
Default: ON.
Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Default: ON.
Enables or disables the Thunderbolt features during preboot.
Default: OFF.
Enables or disables the PCIE devices connected through a Thunderbolt adapter
to execute the PCIe device's UEFI option ROM(s) present during preboot.
Default: OFF.
Limits Type-C port functionality to video or power only.
Default: OFF.
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Enables or disables various onboard drives.
System setup
69
Advertisement
Table of Contents
