5. Replace the screw (M2x4) that secures the wireless-card bracket to the wireless card and the system board.
Next steps
1. Install the
base
cover.
2. Exit
Service
Mode.
3. Follow the procedure in
GPU fan
Removing the GPU fan
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
base
cover.
About this task
The figure indicates the location of the GPU fan and provides a visual representation of the removal procedure.
Steps
1. Flip the Mylar cover open.
2. Disconnect the GPU fan cable from the system board.
3. Remove the two (M2x4) screws that secure the GPU fan to the palm-rest and keyboard assembly.
4. Unroute the I/O cable from routing guides underneath the GPU fan.
5. Slide and lift the GPU fan off the palm-rest and keyboard assembly.
34
Removing and installing components
After working inside your
Before working inside your
computer.
computer.