Table of Contents
Advertisement
The following image indicates the location of the memory module and provides a visual representation of the installation
procedure.
Steps
1. Lift the Mylar to access the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly at an angle, into the memory-module slot.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 to install any other memory modules in your computer.
Next steps
1. Install the
base
cover.
2. Exit
Service
Mode.
3. Follow the procedure in
After working inside your
computer.
Removing and installing components
25
Advertisement
Table of Contents
