Eastwood 20198 Instructions Manual

Eastwood 20198 Instructions Manual

8" bench

Advertisement

Quick Links

Item #20198
8" BENCH
SHEAR
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20198 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eastwood 20198

  • Page 1 Item #20198 8" BENCH SHEAR INSTRUCTIONS...
  • Page 2 Your EASTWOOD 8” BENCH SHEAR for metal cutting is designed for quickly and cleanly cutting mild steel, aluminum and other metals. Torque-amplifying, compound linkage provides low effort and a hardened steel ferrule in the Body, with mating Shear hole in the Blade, allow precision shearing of rod material.
  • Page 3 • Frequently inspect Blades. If cracks or chips develop, discontinue tool use immediately and replace damaged Blades. SET UP • The Eastwood Bench Shear must be securely mounted on a heavy, solid workbench, stand, floor etc., capable of holding the static weight of the unit plus the stresses from operation.
  • Page 4 Handle Stub " " " " Shear Hole Blade " " " " Actuating Link Upper Blade " " " " Place Leading Edge of Metal Here " " " " Lower Blade Body Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
  • Page 5 1. With a 16mm Wrench (not included), loosen and remove the three Lower Blade retaining Bolts and Washers (FIG 6). 2. Carefully withdraw the Lower Blade (FIG 7). FIG. 6 FIG. 7 Lower Blade To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 6 8. Insert the Pivot Shoulder Bolt and thread on the Nut then firmly finger tighten. 13mm and 14mm Wrenches (not included) may be used however do not overtighten which will cause binding (FIG 10). 9. Remove the screwdriver from the Shear Holes. FIG. 10 Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
  • Page 7 • Inspect Blades for cracks, damage or premature wear. Replace if damaged. • Clean chips, dirt and debris from Blades. TROUBLESHOOTING Produces Worn Blades Replace Blades. a Rough, Jagged Cut or Material Too Thick Refer to Maximum Material Specs. Fails to Cut To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 8 #20456 Replacement Blades If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/20198manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353...

Table of Contents