The EASTWOOD 12 TON FLOOR SHOP PRESS is excellent for many mechanical procedures requiring a strong linear pressing force for disassembly or assembly operations. A generous 7.1” Ram Stroke and adjustable 3” to 36” vertical working range can easily accommodate many ball joint, u-joint, bearing, bushing and gear pressing projects.
INJURY HAZARD! • While in use, objects under pressure in the Eastwood 12 Ton Floor Shop Press can suddenly slip out of position, releasing a great deal of stored energy and force causing serious injury or death and property damage. Work from the Pump side of the Frame at all times.
Page 4
• Unthread and remove the pre-installed Lock Collar from the Ram [P] and place it aside for later re-installation (FIG 6). FIG. 3 FIG. 3 FIG. 4 FIG. 4 FIG. 5 FIG. 5 FIG. 6 FIG. 6 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
Page 5
Pedal [F], slip a Linkage Clevis Pin [W] through the holes and secure with a Cotter Pin [X] (FIG 12). FIG. 9 FIG. 9 FIG. 10 FIG. 10 FIG. 11 FIG. 11 FIG. 12 FIG. 12 To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 6
• Slide the Pump Handle [K] into the Pumping Lever of the Pump [L] (FIG 15). • The Arbor Plates [Y] are placed as needed on top of the Table [J] to support the workpiece. FIG. 15 FIG. 15 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
INJURY HAZARD! While in use, objects under pressure in the Eastwood 12 Ton Floor Shop Press can suddenly slip out of position, releasing a great deal of stored up energy and force causing serious injury or death and property damage. Work from the Pump side of the Frame at all times.