Edit Key Tag - HandyTrac Key Control Easy Manual Installation And Operation

Edit Key Tags
If a key tag gets lost or damaged, you will need to EDIT the old tag out of the Datalog-Key Pad.
TO EDIT A KEY TAG
1) Access the system using your badge and pin.
*Badge must have Master Access to edit
Keytags!*
2) Enter Activity Code 04 (Edit key tag).
3) Enter the old key tag number. If you don't have
the old tag you'll need to look it up on the Key
Map.
4) SCAN the new tag to enter it.
5)
The screen confirms the tag has been replaced.
When you press ENTER, the screen will return
to ENTER OLD TAG screen in step 3. Enter the
next unit number you want to replace or press
OUT.
12