Madison Park Connie Assembly Instructions

Counterstool

Important safety instructions:

Please carefully read all instructions before assembling.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

Remove all parts and hardware from box along with any plastic protective packaging.

Table of Contents

Do you have a question about the Connie and is the answer not in the manual?

Page 1 Important safety instructions: Please carefully read all instructions before assembling. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
Page 2 Assembly Procedures: Step 1. Assemble the stool on a flat, soft surface such as a carpet or cloth to prevent scratching the finish. Open the bottom covering. Loosely attach the back left leg (P2) to seat cushion (P1) following the label "P2" on the back left leg (P2) and seat cushion (P1) accordingly and using bolts (H1), lock washers (H2) and flat washers (H3) as shown below.
Page 3 Step 3. Insert the right side stretcher (P9) between the back right leg (P3) and front right leg (P4) following the label "P9" and "P4" on each part accordingly. Loosely attach front right leg (P4) to the bottom of seat cushion (P1) using bolts (H1), lock washers (H2) and flat washers (H3) as shown below.