Disassemble Spool/Sleeve Set And Remove Dust Seal And Shaft From Housing - Danfoss VSPP Service Manual

Service Manual
VSPP Steering unit
VSPP disassembly

Disassemble spool/sleeve set and remove dust seal and shaft from housing

18 | © Danfoss | November 2019
1. Press out the cross pin (12).
2. Remove the ring (16).
3. Carefully press out the spool of the sleeve (1).
4. Press the set of neutral springs (14) out of the slot of the spool.
5. Remove the dust seal (9), and the shaft seal (7), carefully with a 2mm screw driver.
The VSPP steering unit is now completely dismantled.
Disassembled VSPP Steering unit
AX319758618681en-000101