Table of Contents
Advertisement
Service Manual
VSPP Steering unit
VSPP assembly
©
Danfoss | November 2019
Marking on spool and sleeve
2. Guide the spool into the sleeve (1).
Make sure the neutral springs (14) are placed into the slot.
3. Line up the spring set (14).
Aligning the spring set
4. Guide the ring (16) down over the sleeve.
The ring sould be able to move freely of the springs.
5. Fit the cross pin (12) into the spool/sleeve set.
AX319758618681en-000101 | 21
Advertisement
Table of Contents
