Assemble Valve Parts, O-Rings, Distributor Plate, Cardan Shaft, Gear Set, And End Cover To Gear Set End Of Housing - Danfoss VSPP Service Manual

Service Manual
VSPP Steering unit
VSPP assembly

Assemble valve parts, O-rings, distributor plate, cardan shaft, gear set, and end cover to gear set end of housing

26 | © Danfoss | November 2019
To assemble below parts to gear set end of housing, follow these steps.
Ensure that the VSPP unit is placed in the holding tool, with the column surface on the fixture.
VSPP correctly placed in holding tool for assembly
VSPP exploded view drawing - gear set end
Item Description
4 Threaded bushing
172 Pin bolt screw for LS check
31 Screw
32 Pin bolt screw
1. Place balls as illustrated in the drawing:
a) Place ball (1x 5) Ø6mm for emergency steering.
b) Place ball (2x 81) Ø5/16" /Ø4,8 mm for suction valves.
c) Place ball (1x 173) Ø3,5 mm for LS-check function.
Wrench size
12 mm screw driver
2 mm Hex key
13 mm socket spanner
13 mm socket spanner
Torque
Screw below surface of housing
1 ± 0.1 N•m [8.9 ± 0.9 lbf•in]
30 ± 6 N•m [265 ± 52 lbf•in]
30 ± 6 N•m [265 ± 52 lbf•in]
AX319758618681en-000101