Softener Connection To Piping; Block Diagram - Pentair Riversoft Installer Manual

Installer Manual Riversoft - Installation
4.5.

Softener connection to piping

TIP

To prevent your softener from incoming sediment and iron particles, Pentair recommends
the installation of a 100 μm pre-filter upstream the unit.
MANDATORY
The unit should be installed in accordance with the manufacturer's recommendations and
meet all applicable plumbing codes.

4.5.1. Block diagram

Main inlet
Filter cartridge
Pressure regulator
Suggested options
Integrated in the softener
Resin tank
28 / 90

Valve
Pressure gauge
Check valve to prevent water
harm
By-pass
Manifold (configuration dependant)
Meter
Mixing device
Ref. MKT-IM-045 / A - 13.03.2020
User's line
Drain line
Brine line
Brine tank
Drain