Advertisement
Quick Links
TDS – Timed Dosing System
TDS DD-230 or 115
Contents
1 Getting started.....................................................................
2 Installation............................................................................
3 TDS-DA (Analog clock) - Set-Up & Operation............................... Page 6
4 TDS-DD (Digital clock) - Set-Up & Operation...............................
5 Maintenance & Accessories ..................................................... Page 10
6 Troubleshooting ..................................................................... Page 12
7 Contacting SEKO ................................................................... Page 12
Instruciton manual TDS series
INSTRUCION MANUAL
TDS SERIES
TDS DA-230 or 115
Code 0000136687
TDS DD-Battery
Page 2
Page 4
Page 8
rev. 1.1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Seko TDS Series
Summary of Contents for Seko TDS Series
- Page 1 3 TDS-DA (Analog clock) - Set-Up & Operation…………………………. Page 6 4 TDS-DD (Digital clock) - Set-Up & Operation…………………………. Page 8 5 Maintenance & Accessories …..………………………………………… Page 10 6 Troubleshooting …………………………………………………………… Page 12 7 Contacting SEKO .………………………………………………………… Page 12 Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 2 TDS – Timed Dosing System GETTING STARTED Thank you for buying this Seko product. Seko’s TDS systems are high quality products suitable for many applications requiring timed dosing. The simplicity of the programming process makes this system easy to use. Welcome The TDS is a metering system with timed operation and a peristaltic pump.
- Page 3 WARNING: When installing or carrying out maintenance on this equipment, always disconnect it from the power supply. Seko is constantly striving to improve all its products, and we therefore reserve the right to make changes at any time without notice.
- Page 4 • Insert the anchors in the holes • Bolt the bracket in place (flat side against the wall with holes on bottom) with the hardware provided • Open the cabinet front, completely unscrew the screws at the right. Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 5 The following components are included: duck check valve in Viton: Threads: 3/8” Standard Drill bit size: 9/16” Injection fitting: Threads: 1/8” Standard Drill bit size: 5/16” Adapter Threads: 3/8” Standard Female -1/2”Standard Male Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 6 TDS – Timed Dosing System TDS DA (ANALOG CLOCK) Circuit diagram WHITE BLACK BLACK BLACK BROWN WHITE BLACK WHITE A. Daily Clock B. Peristaltic Pump C. Timer 2..18 minutes D. Power supply Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 7 TDS DA-230: 1-12 =>1-12am; 13-24=>1-12pm Example To set a dosing time of 30 minutes, following these steps: 1. Set the potentiometer at 15 minutes; 2. Press two jumper as show the picture. Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 8 TDS – Timed Dosing System TDS-DD (Digital lock) Circuit diagram 5 3 2 YELLOW WHITE Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 9 • push-button “h”: for selecting the hours at the time of programming. • push-button “m”: for selecting the minutes at the time of programming. • push-button “¡ ¡ ¡ ¡ ”: SKIP push-button. • push-button “R”: reset. Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 10 Use the 1…7 push button to scroll to the days that dosing will occur as above Use the hour (h) and minute (m) push button to set the “STOP DOSING” time (NOTE: With the standard squeeze tube, the SEKO TDS will feed approximately .8oz/min.) Press “P” button to set.
- Page 11 It will now be possible to position the left-hand switch on “ I ” or “ AUTO ” (for the TDS DD), depending on requirements Instruciton manual TDS series Code 0000136687 rev. 1.1...
- Page 12 • Check squeeze tubing in pump for any cracks or pin holes. • Check tubing for deterioration. CONTACTING SEKO Web site: www.sekousa.com SEKO Italia SEKO Asia pacific SEKO Brasil SEKO Deutschland SEKO France SEKO Iberica SEKO Southern Africa SEKO UK SEKO USA Instruciton manual TDS series Code 0000136687 rev. 1.1...
Need help?
Do you have a question about the TDS Series and is the answer not in the manual?
Questions and answers