User Information - Bosch BEA 030 Original Instructions Manual

Emissions-analyse
Hide thumbs Also See for BEA 030:
Table of Contents

Advertisement

Available languages

Available languages

en
| 14 | BEA 030 | User information
2.

User information

2.1
Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the BEA 030 and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-
up, connection and operation of the BEA 030 and
must always be heeded.
2.3
Measurement category as per
EN 61010-1
EN 61010-1 specifies the general safety requirements
for electrical testers and measuring instruments and
defines the measurement categories from I to IV.
The BEA 030 is intended for use in measurement
category I (CAT 1), i.e. for measurements in circuits
with no direct connection to the mains.
2.4
RED (Radio Equipment Directive)
Robert Bosch GmbH hereby declares that the radio
equipment type BEA 030 conforms to the European
Directive RED 2014/53/EU. The complete text of the
EU declaration of conformity is available from the
following web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding
national regulations on the operation of wireless
devices in the 2.4 GHz and 5 GHz frequency band
must be heeded (e.g. WLAN or Bluetooth).
|
1 689 989 114
2021-01-28
2.5
Wireless connections
i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment
Directive) is an electrical or electronic product
(component) that transmits and/or receives radio
waves as permitted for the purpose of wireless
communication and/or radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the BEA 030 and
must always be observed.
2.6
Bluetooth
2.6.1
Bluetooth USB adapter
The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides
a radio link to components of BEA 030 capable of
wireless communication.
2.6.2
Troubleshooting
i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate
instruction "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
Robert Bosch GmbH

Advertisement

Table of Contents
loading

Table of Contents