At The Md 100 And Md 200 - Tintometer Lovibond MD 100 Instruction Manual

GB Menu options
Store Date
1 Prt
Time Cal
!
PrtG
Mode
On
Off
E 162
MD1X0/200_1b 9b/2020
Prt – Transmitting stored data
1
- to Printer or PC

- at the MD 100 and MD 200

Attention: To print data, or to transmit to a PC, the optional IRiM
(Infrared Interface Module) is required. It can be used in combination
with the devicesMD 100 and MD 200.
notch for IRdata transfer
Retrievemenu (see"Retrieve menu")
press
The IRiM Module and the connected printer/PC must be ready. The
instrument displays"PrtG" (Printing) for approx. 1 second.
press
All data sets will be transmitted one after the other. After finishing
the instrument switches to test mode.
The print job can be cancelled by pressing the [On/Off] key. The
instrument switchesoff.
If the instrument isnot able to communicate with the IRiM,a timeout
occursafter approx. 2 minutes. Theerror E132 isdisplayed for approx.
4 seconds. Subsequently, the instrument switches to test mode (see
also IRiM manual).
37