Table of Contents
Advertisement
COMPLETE THE INSTALLATION
1. Turn on the main water supply and check for leaks.
2. Peel off the protective plastic wrap from the stainless steel tank jacket(s).
3. Add the Pentair logo sticker(s) in the desired location on the tank.
Caution
Avoid high flow rates such as bathtub, utility sinks, hose bibs, multi-headed showers, body sprayers, or anything that is
considered high flow for the first 72 hours to avoid flow restrictions caused by carbon blockage of the top basket inside
the carbon tank.
Caution
Carbon dust may be released into the water lines of the house/building during the first few days of water use after carbon
tank installation. The carbon dust is harmless, but may give the water a gray appearance that should diminish within a week
or 10 days depending on water use.
HIGH FLOW CARBON WATER FILTER SYSTEM WITH PRE-FILTER • 9
Advertisement
Table of Contents
