Related Manuals for oventrop Aktor M ST/2P L
Summary of Contents for oventrop Aktor M ST/2P L
- Page 1 Valves, controls + system Electromotive actuator 24 V “Aktor M ST/2P L”, 0-10V Operating instructions...
-
Page 3: Table Of Contents
Electromotive actuator 24 V Contents Contents Page General information ........................4 Validity of the operating instructions ..................4 Type plate ..........................4 Extent of supply ........................4 Contact ............................4 EU Declaration of conformity ....................4 Used symbols ..........................4 Safety-related information ......................4 Correct use ..........................4 Warnings ...........................4 Safety notes ..........................5 2.3.1 Danger in case of inadequate personnel qualification ................ -
Page 4: General Information
Each warning contains the following elements: Warning symbol • “Aktor M ST/2P L” 24V SIGNAL WORD • Operating instructions Type and source of danger Possible consequences if the danger occurs Contact or the warning is ignored. Address f Possibilities of avoiding the danger. OVENTROP GmbH & Co. KG Signal words define the seriousness of the danger Paul-Oventrop-Straße 1 which arises from a situation. 59939 Olsberg DANGER GERMANY Indicates an imminent danger with high risk. Technical service The situation will lead to death or serious Phone: +49 (0) 29 62 82-234 injury if not avoided. -
Page 5: Safety Notes
Electromotive actuator 24 V Safety-related information NOTICE Indicates a situation which may lead to dam- age to property if not avoided. Safety notes We have developed this product in accordance with current safety requirements. Please observe the following notes concerning safe use. 2.3.1 Danger in case of inadequate personnel qualification Any work on this product must only be carried out by qualified tradespeople. As a result of their professional training and experi- ence as well as their knowledge of the relevant legal regulations, qualified tradespeople are able to carry out any work on the described product professional-... -
Page 6: Technical Description
Technical description Electromotive actuator 24 V Technical description Functional description The actuator opens or closes the valve depending on Construction the applied control voltage. Technical data Operating voltage 24 V AC ±10 %, 50/60 Hz 24 V DC ±10 % Power consump- Dimensioning: tion - 9.0 VA (24 V AC)) - 4.5 W (24 V DC) Nominal: - 6.2 VA (24 V AC) -
Page 7: Transport And Storage
Electromotive actuator 24 V Transport and storage Transport and storage 1. Fit the adapter set to your valve according to the enclosed installation instructions. Temperature -0 °C - 50 °C 2. Fit the actuator to the connection thread of the range adapter. -
Page 8: Connection Of The Power Supply
Commissioning Electromotive actuator 24 V Setting of the travel direction with a control volt- After having connected the power supply, the age of 10 V DC internal energy store will be charged first. This process takes about 3.5 minutes. Travel direction and Travel direction and position feedback position feedback Charging of the energy store generally has 100...0 % 0..100 % priority over the actuator functions. Z After having charged the internal energy store, the actuator will carry out an initialisation run. The ac- tuator will move to the upper end position first and... -
Page 9: Operation
Electromotive actuator 24 V Operation Operation Removal Control The actuator is automatically controlled via the con- trol technology. Status LED Illust. 8: Stroke position indicator Illust. 7: Status LED Stroke position indicator of the actuator Status LED CAUTION Status LED Meaning Risk of burns due to hot components Flashing red... -
Page 10: 10. Reinstallation
Reinstallation Electromotive actuator 24 V 11. Disposal 7. Remove the actuator from the valve. Also remove the adapter set if you do not re- Guideline 2012/19/EU WEEE: quire it any longer for this valve. Waste electrical and electronic equipment 10. Reinstallation (WEEE) must not be disposed of with do- mestic waste, but must be dropped off at a collection point for the recycling of electri-... - Page 12 OVENTROP GmbH & Co. KG Paul-Oventrop-Straße 1 59939 Olsberg GERMANY 115801384 V01.01.2020 www.oventrop.com...