Ballast; Front Ballast; Front End Weights (Option); Rear Ballast - Kubota L2501 Operator's Manual

Hide thumbs Also See for L2501:
Table of Contents

Advertisement

BALLAST

BALLAST
WARNING
To avoid personal injury or death:
• You
will
need
the
transporting the heavy implements. When the
implement is raised, drive slowly over rough
ground, regardless of how much ballast is used.
• Do not fill the front wheels with liquid to
maintain steering control.

1. Front ballast

Add weights if needed for stability (2WD and 4WD
models) and improve traction (4WD model). Heavy
pulling and heavy rear mounted implements tend to lift
the front wheels.
Add enough ballast to maintain the steering control and
prevent tip over.
Remove the weight when no longer needed.
IMPORTANT :
• Do not overload the tires.
• Add no more weight than indicated in the
following table.
Maximum weight

1.1 Front end weights (option)

You can attach the front-end-weights to the bumper.
Refer to your implement operator's manual for required
number of weights or consult your local KUBOTA
Dealer to use it.
(1) Front end weights
NOTE :
• Front end weights is the option on [4WD]
models (North America only).

2. Rear ballast

Add weights to rear wheels if needed to improve
traction or for stability. you should match the amount of
L2501
additional
ballast
for
25 kg×5 pieces (275 lbs.)
(2) Bumper
 TIRES, WHEELS, AND BALLAST
rear ballast to job and remove the rear ballast when it is
not needed.
You should add the weight to the tractor in the form of
liquid ballast, rear wheel weights, or a combination of
both.
IMPORTANT :
• Do not overload the tires.
• Add no more weight than indicated in the
following table.
Maximum weight per wheel

2.1 Rear wheel weights (option)

You can attach the rear-wheel-weights to the bumper.
See your implement operator's manual for required
number of weights or consult your local KUBOTA
Dealer to use it.
(1) Rear wheel weights

3. Liquid ballast in rear tires

Water and calcium-chloride-solution provides safe
economical ballast. Using the liquid ballast properly will
prevent tires, tubes, or rims from damaging. The
addition of calcium chloride is recommended to prevent
the water from freezing. The addition of calcium
chloride for weighting the wheels obtains the full
approval of the tire companies. Consult your tire dealer
for addition of calcium chloride.
28 kg x 3 pieces (185 lbs.)
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents