OPERATING THE ENGINE
3. Place
the
PTO-gear-shift-lever
position.
(1) PTO gear shift lever
4. Place the position-control-lever in the "FLOAT"
position.
The "FLOAT" position is the lowest position of
position-control-lever.
(1) Position control lever
5. Set the hand-throttle-lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
6. Insert the starter key into the key switch and turn it
"ON".
38
in
the
"OFF"
(A) On
(B) Off
(A) Down
(A) Increase
(B) Decrease
(A) Preheat
(B) Off
(C) On
7. Check the Easy Checker
™
(See Easy Checker
(1) Engine oil pressure warning
indicator
(2) Electrical charge indicator
8. Fully depress the clutch pedal.
(1) Clutch pedal
(D) Start
™
lamps.
lamps on page 27)
(3) Glow plug indicator
L2501