Checking The Engine Start System [Hst Type]; Pto Clutch Control Switch - Kubota MX5200 Operator's Manual

PERIODIC SERVICE
Preparation before testing
1. Place all the control levers in the "NEUTRAL"
position.
2. Set the parking brake and stop the engine.
(1) Synchro-shuttle shift lever
(2) Clutch pedal
Test of switch for the synchro-shuttle shift lever
1. Sit on the operator's seat.
2. Shift the synchro-shuttle
"FORWARD" or "REVERSE" position.
3. Depress the clutch pedal fully.
4. Disengage the PTO-clutch-control-switch.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the synchro-shuttle shift lever.
Test of switch for the PTO clutch control switch
1. Sit on the operator's seat.
2. Engage the PTO-clutch-control-switch.
3. Depress the clutch pedal fully.
4. Shift the shuttle-shift-lever to the neutral position.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-clutch-control-switch
and lever.
Test of the switch for the operator's seat
1. Sit on the operator's seat.
2. Depress the clutch pedal fully.
3. Start the engine.
4. Engage the PTO-clutch-control-switch.
5. Stand up.
Do not get off the machine.
6. Make sure that the engine shuts off after
approximately 1 second.
7. If the engine does not stop, consult your local
KUBOTA Dealer for servicing the operator's seat.
86

(3) PTO clutch control switch

shift lever to
3. Checking the engine start system
[HST type]
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while
testing.
• If the tractor does not pass the test, do not
operate the tractor.
Preparation before testing
1. Place all the control levers in the neutral position.
2. Set the parking brake and stop the engine.
the
(1) Speed control pedal
(2) Clutch pedal
Test of switch for the speed control pedal
1. Sit on the operator's seat.
2. Depress the clutch pedal fully.
3. Depress the speed-control-pedal to the desired
direction.
4. Disengage the PTO-clutch-control-switch.
5. Turn the starter key to the start position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the speed-control-pedal.
Test of switch for the PTO clutch control switch
1. Sit on the operator's seat.
2. Depress the clutch pedal fully.
3. Engage the PTO-clutch-control-switch.
4. Place the speed-control-pedal in the neutral
position.
5. Turn the starter key to the start position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-clutch-control-switch.
Test of the switch for the operator's seat
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the PTO-clutch-control-switch.
4. Stand up.
Do not get off the machine.
SERVICE EVERY 50 HOURS
(3) PTO clutch control switch
MX5200