Pto Shaft Cover And Pto Shaft Cap - Kubota L2501 Operator's Manual

PTO OPERATION
5. Dismount the operator's seat and tilt up quickly.
Engine will stop if there is a delay in tilting up the
operator's seat.
[Manual transmission type]
[HST type]
(1) Operator's seat
(2) PTO gear shift lever
NOTE :
• If the PTO system is engaged and you stand
up from the operator's seat or the operator's
seat is not tilted forward, the engine stops
automatically after standing up.
3. PTO shaft cover and PTO shaft
cap
Keep the PTO-shaft-cover in place at all times.
Replace the PTO-shaft-cap when the PTO shaft is not
in use.
When connecting or disconnecting the joint to the PTO
shaft, raise up the PTO-shaft-cover.
L2501
(A) Tilt forward
(B) On
(C) Off
(1) PTO shaft cover
(2) PTO shaft cap
IMPORTANT :
• The universal joint of the PTO-drive-shaft is
technically limited in its moving angle. Refer to
the PTO Drive Shaft Instructions for proper use.
POWER TAKE-OFF (PTO)
(A) Normal position
(B) Raised position
59