Refer to the instructions supplied with the burner.
1 Water level
Regularly check the level of water in the system and top up if
required, taking care that cold water is not added suddenly into the
boiler when it is hot.
2 Draining
We advise you against draining the system unless it is absolutely
necessary.
The identification plate fixed on the side of the boiler during
installation is used to identify the boiler correctly and also provides
the main specifications of the boiler.
Boiler type
Power ranges
Thermic output
See next page.
06/04/06 - 300008441-001-C
Burner maintenance
System maintenance
This operation should be required only a few times in each heating
season, with very low quantities of water; otherwise, look for the leak
and repair it.
Identification plate
Spare parts
Remeha P 420
17