3-24
MVI Backplane API
Publication 1756-RM004B-EN-P - October 2000
MVIbp_GetSetupMode
Syntax:
int
MVIbp_GetSetupMode(MVIHANDLE handle, int *mode);
Parameters:
handle
handle returned by previous call to MVIbp_Open
mode
pointer to an integer that is set to 1 if the Setup Jumper is
installed, or 0 if the Setup Jumper is not installed.
Description:
This function is used to query the state of the Setup Jumper. handle
must be a valid handle returned from MVIbp_Open.
mode is a pointer to an integer. When this function returns, mode will
be set to 1 if the module is in Setup Mode, or 0 if not.
If the Setup Jumper is installed, the module is considered to be in Setup
Mode. It may be useful for an application to detect Setup Mode and
perform special configuration or diagnostic functions.
Return Value:
MVI_SUCCESS
MVI_ERR_NOACCESS
Example:
MVIHANDLE
handle;
int
mode;
MVIbp_GetSetupMode(handle, &mode);
if (mode)
// Setup Jumper is installed - perform configuration/diagnostic
else
// Not in Setup Mode - normal operation
no errors were encountered
handle does not have access