Rockwell Automation Allen-Bradley ControlLogix 1756-MVI Programming Reference Manual page 133

To download a disk image to the 1756-MVI module, follow these
steps:
1. Install the Setup Jumper on the 1756-MVI module. See the
Installation Instructions for details.
2. Connect PRT1 of the 1756-MVI module to your selected port on
the computer using a null-modem serial cable.
3. Using HyperTerm, make sure the MVI module is at the A:/
prompt.
4. Close HyperTerm.
5. Click on the MVI Flash Update icon to start the program.
6. Select the COM port which is connected to PRT1 of the
1756-MVI module. See figure 6.4.
Figure 6.4 MVI Flash Update Connection Dialog
Once a connection to the module has been established, the
Download File dialog shown in figure 6.5 is displayed.
Figure 6.5 MVI Flash Update Download File Dialog
Programming the MVI Module
Publication 1756-RM004B-EN-P - October 2000
6-9