Advertisement
Title:
Face Terminal Wiegand Output Configuration
Product:
Access Conrtol
Face Terminal Wiegand Output Configuration
Instructions
Face terminals, such as K1T604, 605, 606, 607 support Wiegand output mode. In this output
mode, face terminal will send person's card number after this person authenticate
successfully on the terminal. So you can connect face terminal to access controller or other
face terminal to work as a reader.
Steps
1. Wiring
Connect face terminal's Wiegand to controller or another access control terminal:
2. Power on face terminal and controller.
3. Change face terminal's Wiegand mode to output:
We can do this step either on ivms4200 or device local interface. Choose direction
as
output
and choose Wiegand 26 or 34 according to requirement.
Version:
v1.0
Page:
1 of 4
Local Interface
Date:
4/6/2019
Advertisement
Table of Contents
Related Manuals for HIKVISION K1T604
Summary of Contents for HIKVISION K1T604
- Page 1 Face Terminal Wiegand Output Configuration Instructions Face terminals, such as K1T604, 605, 606, 607 support Wiegand output mode. In this output mode, face terminal will send person’s card number after this person authenticate successfully on the terminal. So you can connect face terminal to access controller or other face terminal to work as a reader.
- Page 2 Title: Face Terminal Wiegand Output Configuration Version: v1.0 Date: 4/6/2019 Product: Access Conrtol Page: 2 of 4 4200 Interface 4. Apply person information to both controller and face terminal...
- Page 3 Title: Face Terminal Wiegand Output Configuration Version: v1.0 Date: 4/6/2019 Product: Access Conrtol Page: 3 of 4 First Choice for Security Professionals HIKVISION Technical Support...
Need help?
Do you have a question about the K1T604 and is the answer not in the manual?
Questions and answers