HIKVISION DS-K27 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. IP Access Controllers
  5. DS-K27 Series
  6. User manual

HIKVISION DS-K27 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

DS-K27XX Series Access Controller
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K27 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K27 Series

Summary of Contents for HIKVISION DS-K27 Series

  • Page 1 DS-K27XX Series Access Controller User Manual...
  • Page 2 ● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
  • Page 3 LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...
  • Page 4 DS-K27XX Series Access Controller User Manual Available Model Product Name Model Access Controller DS-K2701X Series Access Controller DS-K2702X Series Access Controller DS-K2702WX-E1 Series Access Controller DS-K2704X Series Access Controller DS-K2708X Series Access Controller Access Module DS-K2M002X Access Module...
  • Page 5 DS-K27XX Series Access Controller User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K27XX Series Access Controller User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K27XX Series Access Controller User Manual Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
  • Page 8 DS-K27XX Series Access Controller User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
  • Page 9 DS-K27XX Series Access Controller User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed ●...

  • Page 10: Table Of Contents

    DS-K27XX Series Access Controller User Manual Contents Chapter 1 Features ........................1 Chapter 2 Appearance ........................ 2 2.1 Appearance and Interfaces of 1-Door/2-Door/4-Door/8-Door Access Controller ....2 2.2 Access Module Appearance ....................6 2.3 Indicator Description ......................7 Chapter 3 Terminal Wiring ......................9 3.1 Wiring Description .........................
  • Page 11 DS-K27XX Series Access Controller User Manual Chapter 9 Operation via Web Browser ..................29 9.1 Login ............................ 29 9.2 Forget Password ........................29 9.3 Module Description ......................29 9.4 Access Control Management ....................30 9.4.1 Overview ........................30 9.4.2 Search Event ........................ 30 9.4.3 Access Point Management ..................
  • Page 12 DS-K27XX Series Access Controller User Manual 9.7.11 Access Configuration ....................62 9.7.12 Card Settings ......................64 9.7.13 Maintenance and Security ..................66 9.7.14 Certificate Management ................... 68 Chapter 10 Other Platforms to Configure .................. 70 Appendix A. Dimension ......................71...

  • Page 13: Chapter 1 Features

    DS-K27XX Series Access Controller User Manual Chapter 1 Features The access controller and access module are cascaded by RS-485. The 4-door access controller ● can control up to 128 doors, the 2-door access controller can control up to 126 doors, and the 1- door access controller can control up to 125 doors.

  • Page 14: Chapter 2 Appearance

    DS-K27XX Series Access Controller User Manual Chapter 2 Appearance 2.1 Appearance and Interfaces of 1-Door/2-Door/4-Door/8-Door Access Controller The appearance and interfaces of 1-door/2-door/4-door/8-door access controller are as follows. Appearance and Interfaces of 1-Door Access Controller Figure 2-1 Appearance and Interfaces of 1-Door Access Controller...
  • Page 15 DS-K27XX Series Access Controller User Manual Figure 2-2 Appearance and Interfaces of 1-Door Access Controller Main Board Appearance and Interfaces of 2-Door Access Controller Note Only partial models support Wi-Fi and POE function. ● PoE model devices need to be aware of the following: ●...
  • Page 16 DS-K27XX Series Access Controller User Manual Figure 2-3 Appearance and Interfaces of 2-Door Access Controller Figure 2-4 Appearance and Interfaces of 2-Door Access Controller Main Board...
  • Page 17 DS-K27XX Series Access Controller User Manual Appearance and Interfaces of 4-Door Access Controller Figure 2-5 Appearance and Interfaces of 4-Door Access Controller Figure 2-6 Appearance and Interfaces of 4-Door Access Controller Main Board...

  • Page 18: Access Module Appearance

    DS-K27XX Series Access Controller User Manual Appearance and Interfaces of 8-Door Access Controller Figure 2-7 Appearance and Interfaces of 8-Door Access Controller 2.2 Access Module Appearance View the access module appearance.

  • Page 19: Indicator Description

    DS-K27XX Series Access Controller User Manual Figure 2-8 Access Module Appearance 2.3 Indicator Description The indicator description of 1-door/2-door/4-door/8-door access controller and access module is as follows. Device Name Description 1-Door Access Controller There are a total of 9 indicators: a power supply indicator, a working status indicator, a network indicator, a door status and 5 RS-485 status indicators.
  • Page 20 DS-K27XX Series Access Controller User Manual Note Some models do not support Wi-Fi indicators. 4-Door Access Controller There are a total of 12 indicators: a power supply indicator, a working status indicator, a network indicator, 5 RS-485 status indicators and 4 door status indicators. 8-Door Access Controller Access Controller: There are a total of 12 indicators: a power supply indicator, a...

  • Page 21: Chapter 3 Terminal Wiring

    DS-K27XX Series Access Controller User Manual Chapter 3 Terminal Wiring Terminal Wiring Description of the Access Controller. 3.1 Wiring Description The wiring of 1-door/2-door/4-door/8-door access controller are as follows. Figure 3-1 The Wiring of 1-Door Access Controller...
  • Page 22 DS-K27XX Series Access Controller User Manual Figure 3-2 The Wiring of 2-Door Access Controller...
  • Page 23 DS-K27XX Series Access Controller User Manual Figure 3-3 The Wiring of 4-Door Access Controller...

  • Page 24: Wiegand Card Reader Wiring

    DS-K27XX Series Access Controller User Manual Figure 3-4 The Wiring of Access Module 3.2 Wiegand Card Reader Wiring You can view the Wiegand card reader wiring diagram.

  • Page 25: Rs-485 Card Reader Wiring

    DS-K27XX Series Access Controller User Manual Figure 3-5 Wiegand Card Reader Wiring Diagram Note You must connect the OK/ERR/BZ, if using access controller to control the LED and buzzer of the Wiegand card reader. 3.3 RS-485 Card Reader Wiring You can view the RS-485 card reader wiring diagram. Figure 3-6 RS-485 Card Reader Wiring Diagram Note If the card reader is installed too far away from the access controller, you can use an external...

  • Page 26: Door Lock Wiring

    DS-K27XX Series Access Controller User Manual 3.4 Door Lock Wiring You can view the door lock wiring diagram. Figure 3-7 Wiring Diagram of Door Lock 3.5 Alarm Wiring You can view the alarm wiring diagram. Figure 3-8 Alarm Wiring 3.6 Exit Button Wiring You can view the exit button wiring diagram...

  • Page 27: Door Contact Wiring

    DS-K27XX Series Access Controller User Manual Figure 3-9 Exit Button Wiring 3.7 Door Contact Wiring You can view the door contact wiring diagram. Figure 3-10 Door Contact Wiring 3.8 Fire Alarm Module Wiring You can view the fire alarm module wiring diagram.
  • Page 28 DS-K27XX Series Access Controller User Manual Figure 3-11 Fire Alarm Module Wiring...

  • Page 29: Chapter 4 Installation

    DS-K27XX Series Access Controller User Manual Chapter 4 Installation 4.1 Install Access Controller The access controller chassis can be wall-mounted. Steps Note Indoor use only. ● The minimum bearing weight of the wall or other places should be 3 times heavier than the ●...
  • Page 30 DS-K27XX Series Access Controller User Manual Figure 4-2 Hang Chassis 3. Close the chassis cover to complete the installation.

  • Page 31: Install Access Controller Main Board

    DS-K27XX Series Access Controller User Manual Figure 4-3 Complete Installation 4.2 Install Access Controller Main Board The access controller main board can be wall-mounted. Steps Note Indoor use only. ● The minimum bearing weight of the wall or other places should be 3 times heavier than the ●...
  • Page 32 DS-K27XX Series Access Controller User Manual Figure 4-4 Secure Rail 2. Align the rail groove on the bottom of the device with the rail, press the device, and snap the device to the rail with the tabs on the bottom.
  • Page 33 DS-K27XX Series Access Controller User Manual Figure 4-5 Fix Device 3. Installation completed.
  • Page 34 DS-K27XX Series Access Controller User Manual Figure 4-6 Complete Installation...

  • Page 35: Chapter 5 Settings

    DS-K27XX Series Access Controller User Manual Chapter 5 Settings Hardware Initialization Hold the restore button for 5s to initialize the hardware. Fire Relay NO/NC The position of the fire jumper cap position and the related NO/NC status are as follows: Note This operation requires disassembling the upper and lower shells of the device, which is recommended by a professional.

  • Page 36: Chapter 6 Activation

    DS-K27XX Series Access Controller User Manual Chapter 6 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: The default IP address: 192.0.0.64 ●...
  • Page 37 Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.
  • Page 38 DS-K27XX Series Access Controller User Manual 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification.

  • Page 39: Chapter 7 Typical Application

    DS-K27XX Series Access Controller User Manual Chapter 7 Typical Application The typical application for access controller, access module, lock and platform is as follows. Figure 7-1 Typical Application 1 No RS-485 redundant protection max. 128 doors. Note The DS-K2704X series support up to 128 doors; K2702X series support up to 126 doors; K2701x series support up to 125 doors.

  • Page 40: Chapter 8 Quick Operation Via Web Browser

    DS-K27XX Series Access Controller User Manual Chapter 8 Quick Operation via Web Browser 8.1 Set Security Question If you forget the device activation password, you can change the password via security questions. Set the security questions before configuration. Click in the top right of the web page to enter the Change Password page. You can click Skip to skip the step.

  • Page 41: Chapter 9 Operation Via Web Browser

    DS-K27XX Series Access Controller User Manual Chapter 9 Operation via Web Browser 9.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation ●...

  • Page 42: Access Control Management

    DS-K27XX Series Access Controller User Manual 9.4 Access Control Management 9.4.1 Overview You can select the area and control the door status, view the device status, view the event, view the person information, network status, basic information, and device capacity. You can also enter the page from quick start part.

  • Page 43: Access Point Management

    DS-K27XX Series Access Controller User Manual Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. Note The searched name should be up to 32 bits. The results will be displayed on the right panel.
  • Page 44 DS-K27XX Series Access Controller User Manual Figure 9-1 Set Door Parameters Door Name You can create a name for the door. Area Select an added area or click Add Area to add a new area for the door. Open Duration Set the door unlocking duration.
  • Page 45 DS-K27XX Series Access Controller User Manual Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event.
  • Page 46 DS-K27XX Series Access Controller User Manual Figure 9-2 Set Authentication Parameters Card Reader Parameter Configuration Card Reader Name Create a name for the card reader.
  • Page 47 DS-K27XX Series Access Controller User Manual Card Reader Type/Card Reader Description View the card reader's type and description. Enable Authentication Device Enable the authentication function. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval.

  • Page 48: Permission Management

    DS-K27XX Series Access Controller User Manual Enable the function and you can open the door via bluetooth through App. You should add the device to the App before use the function. Authentication Plan Configuration Set the authentication schedule for the card reader. Select an authentication type and drag the time duration on the time schedule table to draw the authentication duration.
  • Page 49 DS-K27XX Series Access Controller User Manual Figure 9-3 Set Access Schedule Template 2. Set the template. Name Set the template name. 3. On the weekly schedule template, drag the cursor to draw on the time bar. Note You can set up to 8 access periods per day. 4.
  • Page 50 DS-K27XX Series Access Controller User Manual Set Holiday Schedule Template You can set a legal holiday or a specified date as a holiday. The access permission of holiday is higher than other basic access permission. Steps 1. Click Access Control → Permission Management → Holiday Schedule Management → + Add. Figure 9-4 Set Holiday Schedule Template 2.

  • Page 51: Access Control Application

    DS-K27XX Series Access Controller User Manual Figure 9-5 Set Access Permission 2. Enter Access Permission Name. 3. Select Access Schedule. You can click View on the right side to view the access period of different template. 4. Click + Add to check the access point, and click Save. 5.
  • Page 52 DS-K27XX Series Access Controller User Manual Figure 9-6 Open Door with First Person 2. Click + Add, and select the access point. 3. Set the parameters of first person. Rule of Opening Door Remain Open After the first person is authenticated, the door opening status will last for a period of time, and other personnel can pass without authentication during this time period.
  • Page 53 DS-K27XX Series Access Controller User Manual 3) Click OK. 5. Click OK. 6. Optional: Select multiple first personnel and click Delete to delete related settings. Multi-Factor Authentication Settings Only after authenticating according to the multi-factor authentication rule, can persons in multi- factor authentication groups open the door.
  • Page 54 DS-K27XX Series Access Controller User Manual 3) Click OK. The added group will show in the list on the left side of the page. When you select a group, the information about the people in the group will show on the right side of the page. 4) Optional: Select a group, click + Add, and you can add more group members.
  • Page 55 DS-K27XX Series Access Controller User Manual Multi-Door Interlocking Settings Multi-door interlocking refers to multiple doors forming an interlocking combination, in which one door can only be opened at most at the same time, and the other doors must be closed. Before You Start The device is added.
  • Page 56 DS-K27XX Series Access Controller User Manual Anti-Passback Settings Personnel must follow the set route for one-way passing. If you do not follow this route for authentication, the door will not open. If a person does not enter the door after swiping the card, the door will not open when swiping the card again, and the same will apply when going out.
  • Page 57 DS-K27XX Series Access Controller User Manual If not, the anti-passback authenticating failed. And the anti-passback authenticating failed in any other cases. Note If you violated the anti-passback rule, you should swipe the card again from the first card ● reader. Superusers do not follow the above rules.
  • Page 58 DS-K27XX Series Access Controller User Manual Steps 1. Click Access Control → Access Control Application → Remain Open or Closed. Figure 9-10 Remain Open or Closed Settings 2. Click + Add. 3. Add the access point. 1) Click + Add. 2) Select the access point, and click OK.

  • Page 59: Person Management

    DS-K27XX Series Access Controller User Manual 9.5 Person Management 9.5.1 Add Organization After you add an organization, you can add people to the corresponding organization. Steps 1. Click Person Management to enter the settings page. 2. Click + on the left side of the page and select the parent organization. 3.
  • Page 60 DS-K27XX Series Access Controller User Manual Click Save and Configure to save the settings and continue to add next person. Add Card Click Person Management → Add to enter the Add Person page. Click Configuration. If select the Collection Device as Card Enrollment Station, you should select the device model, card type, set buzzing, M1 card encryption, and sector.
  • Page 61 DS-K27XX Series Access Controller User Manual Make sure you have already set the PIN mode as Device-Set Personal PIN in Set Password Mode . Click PIN Mode on the page to go to configure. Click Person Management → Add to enter the Add Person page. Set the PIN.

  • Page 62: Device Management

    DS-K27XX Series Access Controller User Manual Select multiple person, click Delete can delete person in batch. Click Clear All to delete all person information. Click to switch the viewing method. Enter the person's employee ID and select the credential status and click Filter to search. Click Reset to reset all conditions.
  • Page 63 DS-K27XX Series Access Controller User Manual Figure 9-11 Add Access Module 2. Select the dial address of the access module, and set the DIP switch of the access module to be consistent with the one shown in the picture. Note After adding or modifying the dialing address of the access module, you need to reboot the access module to take it effect.
  • Page 64 DS-K27XX Series Access Controller User Manual The door magnetic sensor can be controlled as Remain Closed or Remain Open. Under normal circumstances, it is Remain Closed (except for special needs). Exit Button Type Under normal circumstances, it is Remain Open (except for special needs). Extended Open Duration For the elderly or children with reduced mobility, by set Extended Open Duration, the door magnetic sensor opening time after swiping card can be appropriately delayed.

  • Page 65: Area Management

    DS-K27XX Series Access Controller User Manual You can upgrade the access module. Select a local upgrade package to upgrade. 9.6.3 Area Management After you create an area, you can add access control points to the area to manage them in a partition.

  • Page 66: Set Dst

    DS-K27XX Series Access Controller User Manual Figure 9-12 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Synchronization Mode You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually.

  • Page 67: Account Security Settings

    DS-K27XX Series Access Controller User Manual 3. Enter the old password and create a new password. 4. Confirm the new password. 5. Click Save. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 68: View Device Arming/Disarming Information

    DS-K27XX Series Access Controller User Manual 9.7.8 View Device Arming/Disarming Information View device arming type and arming IP address. Go to System and Maintenance → System Configuration → System → User Management → Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page. 9.7.9 Network Settings Set Basic Network Parameters Click System and Maintenance →...
  • Page 69 DS-K27XX Series Access Controller User Manual - Click Add and enter a Wi-Fi's name, password, and encryption type. Click Connect. When the Wi-Fi is connected, click OK. 4. Optional: Set the WLAN parameters. 1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will allocate the IP address, subnet mask, and default gateway automatically.
  • Page 70 DS-K27XX Series Access Controller User Manual Figure 9-13 Set ISUP Parameters 2. Check Enable. 3. View the ISUP version, set server IP address, port, device ID, encryption key and view the ISUP status. 4. Optional: Click More to set the network connection priority. 1) Enable WLAN or Wired Network according to your actual needs.

  • Page 71: Event Settings

    DS-K27XX Series Access Controller User Manual Steps 1. Click System and Maintenance → System Configuration → Network → Device Access → Hik- Connect to enter the settings page. Note Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on.
  • Page 72 DS-K27XX Series Access Controller User Manual Figure 9-14 Event Linkage 2. Click 3. Set event source. - If you choose Linkage Type as Event Linkage, you need to select event types from the drop- down list. - If you choose Linkage Type as Card Linkage, you need to enter the card No. and select the card reader.
  • Page 73 DS-K27XX Series Access Controller User Manual Set the access point's action. Click to delete single card reader. Check the card readers and click Delete to delete in batch. Linked Alarm Output If the Linkage Type in the Event Source is Card Linkage, when enable Linked Alarm Output, you can set Triggering Times Configuration, Triggering Times (Enable), and Triggering Times (Disable).

  • Page 74: Access Configuration

    DS-K27XX Series Access Controller User Manual You should set the custom duration. The alarm output device will be in the alarm status for the configured time duration. Note Range: from 1 to 5999s. 9.7.11 Access Configuration You can set RS-485, Wiegand and host parameters. Set RS-485 Parameters You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
  • Page 75 DS-K27XX Series Access Controller User Manual When the access controller connects to the terminal (RS-485A/RS-485B/RS-485C/RS-485D) of the access module, RS-485A and RS-485B are a pair using redundancy wiring, and RS-485C and RS-485D are another pair. When one of the channels is disconnected, the access controller can communicate with another channel.

  • Page 76: Card Settings

    DS-K27XX Series Access Controller User Manual Click Auto Recognize, enter card No. to recognize the Wiegand mode. Enter the Card No., and click Start to Recognize. Present the card on the related card reader. The system will show the Wiegand mode. Click OK. If select Custom, you should set custom Wiegand parameters.
  • Page 77 DS-K27XX Series Access Controller User Manual In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 Card Enable M1 card and authenticating by presenting M1 card is available. M1 Card Encryption Sector M1 card encryption can improve the security level of authentication.

  • Page 78: Maintenance And Security

    DS-K27XX Series Access Controller User Manual 9.7.13 Maintenance and Security Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to System and Maintenance → System Configuration → Security → Privacy Settings Select a method to delete the event.
  • Page 79 DS-K27XX Series Access Controller User Manual Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version. Reboot Device Click System and Maintenance → Maintenance → Restart . Click Restart to reboot the device. Upgrade Click System and Maintenance → Maintenance → Upgrade . Select an upgrade type from the drop-down list.

  • Page 80: Certificate Management

    DS-K27XX Series Access Controller User Manual Import Click and select the file to import. Click Import to start import configuration file. Device Debugging You can set device debugging parameters. Steps 1. Click System and Maintenance → Maintenance → Device Debugging . 2.
  • Page 81 DS-K27XX Series Access Controller User Manual 3. Input certificate information and click Save. Click View and the created certificate will be displayed. ● The certificate will be saved automatically. ● 4. Download the certificate and save it to an asking file in the local computer. 5.

  • Page 82: Chapter 10 Other Platforms To Configure

    DS-K27XX Series Access Controller User Manual Chapter 10 Other Platforms to Configure You can also configure the device via HikCentral Access Control. For details, see the platforms' user manual. HikCentral Access Control (HCAC) Click/tap the link to view the HCAC's user manual. http://enpinfodata.hikvision.com/analysisQR/showQR/f2f6cf42...

  • Page 83: Appendix A. Dimension

    DS-K27XX Series Access Controller User Manual Appendix A. Dimension Dimension of 1-Door/2-Door/4-Door Access Controller Dimension of 8-Door Access Controller...
  • Page 84 DS-K27XX Series Access Controller User Manual Dimension of Access Controller Main Board...
  • Page 85 UD35243B...

This manual is also suitable for:

Ds-k2701x seriesDs-k2702x seriesDs-k2702wx-e1 seriesDs-k2704x seriesDs-k2708c seriesDs-k2701x-p ... Show all

Table of Contents

Save PDF