Manifold; Bulkmeter Main Components - Liquid Controls Avery-Hardoll BM Series Maintenance Manual And Parts List

BM METER
MECHANICAL
REGISTER
CALIBRATING
MECHANISM
2

MANIFOLD

2.1 The manifold is of ductile iron for 2.5" and 3" bores only, or steel fabrication with a bore of either 2.5",
3", 4" or 6", dependant upon the metering capacity (refer to Table 1). The manifold is secured to the
body casing by studs, nuts and washers and sealed by an 'O' ring seal, the center studs are sealed
with an 'O' ring seal and fitted washer. Flanges fitted to the manifold can either be flat or raised face.
Chap 2
Page 2
FIG 2.1 BULKMETER MAIN COMPONENTS
FABRICATED STEEL MANIFOLD
(ALL CAPSULES)
OUTER AND INNER COVERS
DUCTILE IRON MANIFOLD
(SINGLE/DOUBLE CAPSULE ONLY)
ROTOR
ASSEMBLY
S13615
TECHNICAL DESCRIPTION
TP0003B