Care And Cleaning - Haier HLV0845FSSS Owner's Manual

CARE AND CLEANING

CONTROL PANEL
To clean the control panel, use a lightly dampened cloth. Then dry
thoroughly.
EXTERIOR STAINLESS STEEL DOOR
PANEL
(Model numbers ending in SS)
For cleaning rust and tarnish, cleaners with oxalic acid will remove
rust, tarnish and small blemishes. Use only a liquid cleanser free
of grit and rub in the direction of the brush lines with a damp soft
sponge. Do not use appliance wax or polish on the stainless steel.
For other blemishes and marks, use a stainless steel cleaner us-
ing a clean soft cloth. Do not use appliance wax, polish, bleach or
products containing chlorine on stainless steel.
DISHWASHER INTERIOR
To clean and de-odorize your dishwasher, use citric acid or a de-
tergent additive.
UPPER SPARY HEAD
Do NOT remove the upper spray head.
Clean with warm soapy water using a small plastic bristle brush.
SPRAY ARMS
Because hard water chemicals will clog the spray arm jets and
bearings, it is necessary to clean the spray arms regularly.
Wash the arms in soapy, warm water and use a soft brush to
clean the jets. Replace them after rinsing thoroughly.
To remove the upper spray arm, twist the retaining nut 45° and
pull the spray arm off the water supply tube.
Upper
Rack
Upper Spary Arms
IMPORTANT: When replacing make sure to twist lock the retain-
ing nut securely onto the water supply tube. Check that the spray
arm is secure and that it rotates freely.
To remove the lower spray arm, remove the lower rack and lift
spray arm out.
Arm
Clips
Retaining
Ring
IMPORTANT: When replacing make sure to seat the arm clips
over the retaining ring. Check that the spray arm is secure and
that it rotates freely.
Lower Spary Arm
Retaining nut
Lower Spray Arm
11