- After removing the packing, check to make sure that the appli- ance is not damaged. If in doubt, contact a qualified professional. - The dishwasher must only be used by adults for the washing of household dishes and cooking utensils.
Close-up View (Interior) Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack Technical characteristics Width Depth Height Capacity Mains water pressure Power voltage Total absorber power Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser 9 standard place settings 220-240V~ 50Hz 45 cm 60 cm...
Loading the Dishwasher Loading the Dishwasher Loading the Dishwasher Before placing the dishes in the dishwasher, remove the large food particle to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
- Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher"). - Pour in the detergent (see the section entitled, "Detergent and Rinse Aid").
Energy Saving Tips - - - - - It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odors from form- ing and food from caking onto the dishes, you can run the soak cycle.
Troubleshooting Troubleshooting Troubleshooting It may occur that the dishwasher does not function or does not function properly. Before calling for assistance, let us see what can be done first: have you forgotten to press one of the buttons or to perform an essential operation?
Levelling the Appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2 . If the appli- ance is level, it will help ensure proper performance.
Need help?
Do you have a question about the HDW9SS and is the answer not in the manual?
Questions and answers