Haier HLV0845FSSS Owner's Manual page 8

USING THE DISHWASHER
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from
your model.
UPPER RACK
The upper rack is for glasses, cups, and saucers. This is also a se-
cure place for dishwasher-safe plastic items. The upper rack can
be used for odd sized utensils.
Sauce pans, mixing bowls, and other similarly shaped items
should be placed face down for best wash performance.
The cup shelf may be placed in the up or down position to add
flexibility.
HLV0845FSSS Series
8 Place Settings
IMPORTANT: Ensure that items do not protrude through the
bottom of the rack where they will block the rotation of the upper
spray arm. This could result in noise during operation and/or poor
wash performance.
8
QDP225SSPSS
8 Place Settings
UPPER RACK - ADJUSTMENT
A loaded upper rack may be heavier
CAUTION
than anticipated. To prevent minor in-
jury or damage to the contents, do not raise or lower the
upper rack after the rack is loaded.
The upper rack may be adjusted to accommodate larger items.
To adjust the upper rack:
1
Fully extend the upper rack and rotate open the two plastic
end caps on the front of the rails.
2
Remove the upper rack.
3 Select the set of rollers on the side of the rack that provides
the desired height, and reinstall the upper rack by guiding
the rack rails between the appropriate set of rollers.
With the rack reinstalled, rotate closed the two plastic end
4 caps, ensuring the snap is properly engaged. Failure to prop-
erly engage the end caps may result in the rack falling from
the dishwasher.
Remove:
End Cap
Replace:
Rollers
End Cap
Rail
Rollers
Rail