Care And Cleaning - Haier HDW15F3S1 User Manual

Care and Cleaning

Cleaning the filter, spray arms and filter plate
Disconnect the dishwasher from the power supply and allow it to cool
before undertaking any cleaning or maintenance.
We recommend that the drain filter and filter plate are removed and cleaned
once a month or whenever there is evidence of food particles. The spray arms
in normal use should require cleaning less frequently. Lower and upper spray
arms can be shaken to remove any foreign material, cleaned in hot water, then
rinsed in clean water.
The dishwasher must be used with the filter plate, drain filter and spray arms
correctly in place. If using a dishwasher cleaner or descaler, refer to manufacturer
instructions.
Care and Cleaning the Filters
filter cap
filter base
locating notch
clips
An incorrect assembly or position of filters will cause bad washing
results and possibly serious damage to the appliance.
If any filter is removed make sure that no solid object of any size
is left beyond these filters!
29
Twist the filter anti-clockwise to release.
Lift to remove.
Separate the filter cap from the base by
pressing the release buttons and lifting.
button
Do not attempt to remove the filter by
force as this may cause damage.
Clean under hot water and rinse thoroughly.
Replacing the filter
1. Align the filter cap with the notch on the
filter base for one side.
2. Press the button to settle the filter cap on
the filter base for the other side.
3. Slot the filter plate under the locating clips at
the rear of the drain and push firmly back into
place. Ensure the filter plate is flush with the
dishwasher base.
4. Place the drain filter back into the dishwasher
base. Rotate clockwise to click into place.
NZ AU