Filter; How To Replace Filter - Coway Airmega AP-1220B Instructions Manual

HOW TO REPLACE FILTER

■
How to Replace
- Refer to the filter installation method on page 10 to replace the filter.
- Be sure to check the front side when installing the filter.
- Use genuine Coway filter to maintain optimal performance of the product.
- Always unplug the power cord before replacing the filter.
■
Filter Cleaning and Replacement Cycle

Filter

Ultrafine Pre-filter
Customized filter
Deodorization / HEPA filter
∗ If you operate the device for 8 hours everyday at the maximum air volume, it will light up after about
2 weeks of use.
∗∗ If you operate the device for 8 hours everyday at the maximum air volume, it will light up after
about one year of use.
The timing of when the filter cleaning/replacement alarm indicator lights up varies depending on
the use and environment.
- After cleaning or replacing the filter, be sure to press the Filter Replacement Cycle button to reset
the cycle (P.15).
- The filter replacement cycle is the recommended cycle and may vary depending on usage environment.
Cleaning/Replacement Time
When the "PRE" indicator is lit*
Once / 4 months
When "HEPA / CARBON"
indicator is lit**
Cleaning/Replacement
Clean and wash
Replace
Replace