DEAR COWAY’ S CUSTOMERS First of all, we would like to thank you very much for purchasing this air cleaner. This product is superior to the ones in the past in function and we believe that it will provide you with clean and healthy air. We would like to recommend you to read this User's Manual carefully for proper operation and maintenance and keep this manual well together with the warranty.
● Always unplug the air cleaner before moving it, replacing the filter, cleaning it or whenever the air cleaner is not in use. ● Do not plug in or unplug the power cord with wet hands or get the plug wet to avoid electric shock.
Page 4
● Periodically remove dust from the power plug with a dry cloth. Dust lay on the unit can cause bad insulation and a fire may occur due to it. ● When unplugging the power cord, never pull the cord to plug out. Please carry the unit by using a handle in the back of it.
Installation & Use Safety ● Never splash the air cleaner with water to avoid the risk of electric shock. ● To avoid fire hazard, never put the cord under rugs and near heat resistors, radiator, stoves, or heaters. ● Keep the air cleaner out of direct sunlight.
Page 6
● Do not install the air cleaner on the inclined place and let it fall or impact. It may cause a breakdown by an electric shock. ● Please have the unit serviced by the A/S center if it makes smoke or a noise.
Page 7
● a gimlet in sensors of the unit. ● Never use and put the flammable gas or inflammable materials near the air cleaner. ● Never soak the unit in the water. ● Do not modify, disassemble, or repair this appliance by yourself.
FEATURES OF AIR CLEANER AIR CLEANER AP-1503CHE 1. Powerful Air Cleaner The filter system is optimized to remove quickly pollutants. The unit contains the HEPA filter made of Nano Silver and Catechins which can be helpful for removal of bacteria, minute particles.
Page 9
6. Safety Design for Customers The operation of the air cleaner stops by safety switch when the front cover is opened. The ventilation inlet and outlet are designed for the sake of safety to prevent the risk of accidents.
NAMES OF EACH PART Side Odor Sensor Ventilation outlet Particle Sensor Rear Power Cord ▶ ▶ ▶ ▶ ▶ Operation Part ▶ Indication Part ▶ Filter Cover ▶ Handle...
INDICATION PART Indicator of Auto/Manual It indicates whether the unit is operating on automatic mode or manual mode. Operating mode is selected with the ‘Auto/Manual’ button. Indicator of Sleep Mode It indicates the unit is operating on sleep mode, and this mode is available on automatic mode .
Page 13
● ▶ Filter Cover It makes filters safe in front of them. The purification ability can be well because the filter cover is designed able to inhale the air from 5 different ways. ● ▶ Natural Cluster Negative Ions It removes the activated oxygen, the static electricity from the inside air and helps to promote health by discharge of the cluster negative ions.
OPERATION PART ON/OFF It is used to turn on and off the unit. Auto/Manual The unit starts to work on the automatic mode by pushing ‘Auto/Manual’ button and the air flow rate is automatically adjusted through particle & odor sensor depending on the indoor pollution degree.
PRE-OPERATING INSTRUCTIONS WARNING Install filters on the unit after removing their-packing sheet Open the filter cover by pulling Step1 the right side of the cover. Please take out the filter by pushing Step2 the both hooks of the filter, and remove its packing sheet.
HOW TO USE In case of manual mode Select manual mode with the "Auto/Manual" button after turnning on the unit. ● Plug the power cord to the voltage rating that matches on the rating plate. ● It operates on automatic mode by pushing the ‘ON/OFF’...
Page 17
In case of automatic mode The "Auto" light is lighting in the indication part after turning on the unit. ● Plug the power cord to the voltage rating that matches on the rating plate. ● If you push the ‘ON/OFF’ button, the unit operates on automatic mode according to the indoor pollution degree.
Page 18
HOW TO USE How to adjust the pollution sensitivity ※ The unit is set at a standard sensitivity. In case that pollution degree is maintained at the highest or the lowest level for over 2 hours after the unit starts to work, please adjust the sensitivity of sensor as the following the way below.
CLEANING METHOD WARNING Unplug power plug before cleaning. Cleaning a Particle Sensor & Odor Sensor(Every 2 months) ● Please clean the ventilation inlet and outlet of sensors with a soft brush, or a vacuum cleaner. ● Please wipe the lens with a cotton swab soaked with water and get rid of moisture by using dry one.
Page 20
CLEANING METHOD Cluster Ion Electrode Part Cleaning(Every 2months) ● Please get rid of dirties on the charged body and the electric discharge pin of the cluster with soft brush of cotton swab ion after opening a ventilation grill with a screw driver. Pre-Filter Cleaning(Every 2~4 Weeks) ●...
Page 21
WARNING Unplug power plug before cleaning. Install the RBD Plasma filter and the Antibacterial Catalysis filter in the unit after complete dry. RBD Plasma Antibacterial Catalysis Filter ● Please open the filter cover by pulling the right side of the cover. ●...
Page 22
CLEANING METHOD ● Please clean the antibacterial filter with the brush or the vacuum cleaner after the division from the RBD Plasma filter. Be careful of damage to the filter. ※ Even though the filter may get ※ damaged such as a transformation and minor breaks, there is no problem for use.
FILTER REPLACEMENT WARNING Unplug power plug before filter replacement. WARNING The period time of filter replacement should be different according to the surrounding pollution degree of pollution, time of using. Open the filter cover by pulling the Step1 right side of the cover. Separate filter that you want to Step2 replace from the filter case.
Page 24
FILTER REPLACEMENT Estimated Time of Filter Replacement and Cleaning Item Pre-filter Medium filter HEPA filter RBD Plasma filter Antibacterial Catalysis filter AC Deodorizing filter The period time of filter of replacement is based on the use of 24hours a ※ day at step 1 mode.
BEFORE ASKING A/S Check the followings before requesting for A/S. It can not operate properly because of trivial problems or a lack of user's experience even if it is not out of order. In those cases, please check the followings carefully to solve problems. Please call A/S center if you have any problems except the followings.
Page 26
BEFORE ASKING A/S Troubles The degree of pollution does not change. There is a bad smell in a ventilation outlet. is twinkling Is the particle sensor or the odor sensor is twinkling In case other functional defects occur. Points to be checked Is there dust around the particle sensor lens?
Customer counselling Center Call: ☞ In case any other filters or parts which are not genuine products of Coway are used, Coway is not responsible for any problems related to air quality. 658 Yoogoo-Ri, Yoogoo-Eub, Gongju-Si, Choongnam Province, Korea Guarantee Period...