Coway Airmega AP-1220B Instructions Manual page 15

▶ Auto Mode
The device automatically adjusts the air volume (Low → Medium → Strong) according to the indoor
pollution level detected by the sensor to operate efficiently.
This mode is convenient for general users.
Pollution Level 1
Air Volume Auto Level 1
▶ Sleep Mode (only works in Auto Mode)
If the room remains dark during Auto Mode operation, the device enters Sleep Mode and runs low
air/low noise/power saving operation.
∗ The pollution level indicator is turned off during Sleep Mode.
∗ When the room becomes bright again, the device re-enters Auto Mode.
Multi-action function
■ NORMAL Mode
In NORMAL Mode, air is discharged from the ventilator at the top of the product. Press the Power
button to turn on the product and turn the multi-action lever to select NORMAL Mode.
At this time, the NORMAL mode indicator will light up.
■ FOCUS Mode
In FOCUS Mode, air is discharged through the front grille of the product. Press the Power button to turn
on the product and turn the multi-action lever to select FOCUS Mode. At this time, the FOCUS mode
indicator will light up.
- The circulation mode indicator does not light up when the multi-action lever is in the middle.
- When turning the multi-action lever, turn it all the way until the circulation mode indicator
lights up.
Tips
- The multi-action lever turns only up to 90 degrees.
Pollution Levels 2, 3 Pollution Level 4
Auto Level 2 Auto Level 3
▶
▶
▶
▶
13
14