Before You Begin - Fluke 753 Getting Started

•
Use only current probes, test leads, and
adapters supplied with the Product.
•
Do not touch the probes to a voltage
source when the test leads are
connected to the current terminals.
•
Use only cables with correct voltage
ratings.
•
Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
•
Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
Documenting Process Calibrators

Before You Begin

After you unpack the Product, charge the battery for 8
hours (if the battery is outside of the Product, charge for 5
hours). For more information, see "The Battery" in the
753/754 Users Manual. When the Battery is inside the
Product, it will only charge if the Product is off.
Before You Begin
3