Baumatic CAN54SS User Manual
  1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Ventilation Hood
  5. CAN54SS
  6. User manual
Baumatic CAN54SS User Manual

Baumatic CAN54SS User Manual

52 cm canopy hood
Hide thumbs Also See for CAN54SS:
Table of Contents

Advertisement

Quick Links

Download this manual
CAN54SS
Cooker hood

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAN54SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Baumatic CAN54SS

Summary of Contents for Baumatic CAN54SS

  • Page 1 CAN54SS Cooker hood...
  • Page 2 User Manual for your Baumatic CAN54SS 52 cm Canopy Hood NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.

  • Page 3: Table Of Contents

    Contents Page Environmental note IMPORTANT SAFETY INFORMATION Specifications of your cooker hood Using your Baumatic cooker hood The control panel Cleaning your Baumatic cooker hood The grease filter Maintenance Removing and cleaning the grease filter Changing a light bulb Fitting the carbon filters...

  • Page 4: Environmental Note

    Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the...

  • Page 5: Important Safety Information

    IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Technical Department.
  • Page 6 you handle your appliance, especially during installation and cleaning. DO NOT CLEAN IN BEHIND THE GREASE FILTERS! o If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the sealed or balanced flue type.
  • Page 7 removing air from your room. Ensure that proper ventilation measures are being observed. o Note that the cooker hood removes odours from your room, not steam. o Warning - Always ensure that the cooker hood has been disconnected from the power supply before carrying out any work on the hood, including cleaning and replacing light bulbs.

  • Page 8: Specifications Of Your Cooker Hood

    3 Speeds and booster o 2 Metallic grease filters o 2 Halogen lights Extraction capacity: Optional extras: (Both optional extras are available from the Baumatic Spares Department). 500 m³/hr 2 x UCF1 Carbon filters for air recirculation mode Venting kit...

  • Page 9: Using Your Baumatic Cooker Hood

    Using your Baumatic cooker hood The control panel o Before using the cooker hood make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o Find the control panel, which is located in the middle of the canopy.
  • Page 10 o Select a speed using the SPEED 1, SPEED 2 or SPEED 3 buttons. SPEED 1 = SPEED 2 = SPEED 3 = o To switch the halogen light bulbs on, press the LIGHT BULBS ON/OFF button. o The light bulbs can be switched on without the hood being turned on using the LIGHT BULBS ON/OFF button.

  • Page 11: Cleaning Your Baumatic Cooker Hood

    Cleaning your Baumatic cooker hood IMPORTANT: BEFORE CLEANING, ALWAYS ENSURE THAT YOU HAVE SWITCHED YOUR COOKER HOOD OFF AT THE OMNI-POLAR SWITCH, SET AT THE WALL FROM THE MAINS CABLE. Cleaning o Clean the external parts of your cooker hood with mild liquid detergent and a new damp cloth.

  • Page 12: Maintenance

    Maintenance Removing and cleaning the grease filters o Soak the grease filters in hot water and washing up liquid for about an hour. o Rinse them off thoroughly with hot water. o Repeat the process if required. o Refit the grease filters once they have dried. o IMPORTANT: Let the grease filters dry thoroughly before refitting them in the cooker hood.

  • Page 13: Changing A Light Bulb

    IMPORTANT: BEFORE ATTEMPTING TO CHANGE A LIGHT BULB, YOU MUST ENSURE THAT YOU HAVE DISCONNECTED THE COOKER HOOD FROM YOUR MAINS SUPPLY. o Prior to touching the light bulbs ensure they are completely cooled down. o Find the bulb that requires replacement. You will find that the bulbs are secured into a light fixture which can be found inside the exposed section of the canopy.

  • Page 14: Fitting The Carbon Filters

    COOKER HOOD FROM YOUR MAINS SUPPLY. 2) The UCF1 carbon filter is a universal filter; you do not require all of the parts that are supplied with it. For the CAN54SS you will require parts 1 and 13. 3) Remove part 14 of the carbon filter from part 1 (you do not require part 14 when installing the carbon filter in this particular model).
  • Page 15 5) Hook the carbon filter over the pins that are located at the end of the motor. 6) Turn the carbon filter anticlockwise, until you feel it click into place. o Repeat this process for the second carbon filter. You need to place a carbon filter at either end of the motor.

  • Page 16: Installation

    Installation IMPORTANT: Before installation read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found behind the grease filters.

  • Page 17: Electrical Connection

    YOUR COOKER HOOD IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. o If not supplied the power cable must be connected to the terminals marked L (live) and N (neutral) in the hood and fixed with a cable clamp. o The cooker hood’s power cable must be fitted upstream from the electrical connection, using an omni-polar switch with a contact distance of at least 3 mm.

  • Page 18: Before Beginning Installation

    o Check that the product purchased is of a suitable size for the chosen installation area. In addition check whether there is an electrical socket available that will be accessible once the hood is mounted. If the product is going to be used in extraction mode, then there should also be space to connect a ducting hose to the outside.

  • Page 19: Installing Your Cooker Hood

    IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE INSTALLING YOUR COOKER HOOD WHETHER TO USE IT IN EXTRACTION MODE OR RECIRCULATION MODE. PLEASE TURN TO PAGE 23 NOW TO UNDERSTAND THE DIFFERENCES BETWEEN THESE TWO MODES. o The cooker hood should not be exposed to a direct heat source from the cooking device underneath it, i.e.
  • Page 20 1) Remove the metal grease filters. 2) Create an opening in the underneath of the kitchen unit; the cut- out must be of the dimensions shown in the drawing above. IMPORTANT: If you are going to connect your cooker hood to external ducting, then you must complete the steps listed in the “Connecting to external ducting”...
  • Page 21 5) Lift the cooker hood fully into the cut out that you made in step 2. If you are connecting the cooker hood to external ducting, then secure the ducting hose to the coupling on top of the appliance. o One person should support the hood. The other person should fully tighten the four support screws through the holes in the outer frame of the hood, into the kitchen unit.

  • Page 22: Connecting To External Ducting

    It should have a cross section of at least 150 cm² (please note that the ducting hose is not supplied with the appliance but is available from the Baumatic Spares Department). o The maximum distance between the coupling and your discharge outlet should be 3 metres, with one 90 degree bend.

  • Page 23: Extraction Mode Or Recirculation Mode

    The only alternative is to recirculate the air. Do I need a charcoal filter? All cooker hoods have a grease filter but if you are using your cooker hood in recirculation mode, then a charcoal filter must be fitted in addition to the grease filter.

  • Page 24: Troubleshooting

    Troubleshooting IMPORTANT: If your cooker hood appears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. My cooker hood will not start. o Check that the hood is connected to the power supply and whether you have selected any of the fan speeds.

  • Page 25: Baumatic Ltd. Conditions Of Guarantee

    Baumatic appliance. * In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date.

  • Page 26: Contact Details

    Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone...
  • Page 28 28 28...

Table of Contents