Baumatic BRT60SS User Manual
  1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Ventilation Hood
  5. BRT60SS
  6. User manual

Baumatic BRT60SS User Manual

600/900mm stainless steel box canopy rangehood
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual for your Baumatic
600/900mm Stainless Steel Box Canopy Rangehood
BRT60SS
BRT90SS
BRT90ISS
NOTE: This user manual contains important information including safety &
installation points which will enable you to get the most out of your Baumatic
appliance. Please keep it in a safe place so that it is readily available for future
reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BRT60SS and is the answer not in the manual?

Questions and answers

Related Manuals for Baumatic BRT60SS

Summary of Contents for Baumatic BRT60SS

  • Page 1 NOTE: This user manual contains important information including safety & installation points which will enable you to get the most out of your Baumatic appliance. Please keep it in a safe place so that it is readily available for future...

  • Page 2: Table Of Contents

    Contents Environmental note Important safety information Specifications of your rangehood Using your rangehood Before first use To use your rangehood Cleaning your rangehood The grease filter Maintenance Removing and cleaning the grease filter Changing a light bulb Fitting the carbon filter Installation Electrical connection Before beginning installation...

  • Page 3: Environmental Note

    Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person.

  • Page 4: Important Safety Information

    Important safety information Your safety is of the utmost importance to us. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Retailer where you purchased your unit from.
  • Page 5 o When installed between adjoining wall cabinets, the cabinets must not overhang the hob. o The edges of the rangehood are sharp – be mindful of this as you handle your appliance, especially during installation and cleaning. DO NOT CLEAN IN BEHIND THE GREASE FILTERS! o If the room where the rangehood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the sealed or balanced...
  • Page 6 o Do not connect the ducting system of this appliance to any existing ventilation system which is being used for any other purpose. o Do not install above a cooker with a high level grill. o Never leave frying pans unattended during use as overheated fats and oils might catch fire.

  • Page 7: Specifications Of Your Rangehood

    900mm (BRT90SS/BRT90ISS) Depth: 500mm (BRT60/90SS) 600mm (BRT90ISS) Rated Voltage: 220-240 Vac 50 Hz Power Rating: 269W (BRT60SS) / 272W (BRT90SS) / 279W (BRT90ISS) Your rangehood is fitted with: o LED strip lighting SYKL34B (BRT60SS) /SYKL34 (BRT90SS/BRT90ISS) o LED electronic controls...

  • Page 8: Using Your Rangehood

    Using your rangehood Before first use IMPORTANT: This process must be followed before the rangehood is used for the first time. You should use a mild liquid detergent and a damp cloth on all the external areas of your rangehood before it is used for the first time. This will help to remove any residues from the manufacturing process.
  • Page 9 Press once, the motor starts to work at low speed and the LED display will display “1”, Press again base on the low speed, the motor works at mid speed and the LED display will display “2”, Press again base on the mid speed, the motor works at high speed and the LED display will display “3”.

  • Page 10: Cleaning Your Rangehood

    Cleaning your rangehood IMPORTANT: Before cleaning, always ensure that you have switched your rangehood off at the omni-polar switch, set at the wall from the cable. Cleaning o Clean the external parts of your rangehood with mild liquid detergent and a new damp cloth.

  • Page 11: Maintenance

    Maintenance Removing and cleaning the grease filter Part Number: SYRSF353C60 / SYRSF353C90 / SYRSF353IS o First remove the grease filter by sliding the securing nibs at the sides of the grille on the underside of the cooker hood. o Soak the grease filter in hot water and washing up liquid for about an hour. o Rinse it off thoroughly with hot water.

  • Page 12: Fitting The Carbon Filter

    o IMPORTANT: Defective bulbs should be replaced immediately. o If the light still does not work, make sure that the internal plug is fitted properly before you call for technical assistance. o Refit the grease filter. Fitting the carbon filter Part number CF260 / SQ1 If the appliance is going to be used in recirculation mode then it is necessary to fit a carbon filter.

  • Page 13: Installation

    Installation IMPORTANT: Before installation read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found behind the grease filters. The manufacturer declines all responsibility in the event of the installer failing to observe all the accident prevention regulations in force, which are necessary for normal use and the regular operation of the electric...

  • Page 14: Before Beginning Installation

    o The brown wire must be connected to the terminal marked “L” (live), or coloured red. o The green/yellow wire must be connected to the terminal marked “E” or Before beginning installation o Check that the product purchased is of a suitable size for the chosen installation area.

  • Page 15: Installing Your Rangehood

    Installing your rangehood (BRT60SS/BRT90SS) IMPORTANT: You will have to decide before installing your rangehood whether to use it in extraction mode or recirculation mode. Please refer to page 17 to understand the differences between these two modes. o We recommend that at least two people install this rangehood.

  • Page 16: Fitting The Chimney

    3) Feed the exhaust ducting to your desired position then adjust the height of the inside chimney to the inner chimney bracket and screw in place. Once the position is fixed secure the unit with two safety screws through the Ø6mm holes in the back casing.
  • Page 17 10) Lift chimney section (D) upwards until it reaches the ceiling. You must ensure that it is perpendicular to the hood. o Mark the side measurements of both sides of chimney section (D) on the wall with a pencil and then remove chimney section (D). 11) Take the flat bracket (E) and place it between the two pencil marks that you made in step 9.

  • Page 18: Connecting To External Ducting

    o Refit chimney section (C) to the hood and fix it onto the hood using the two screws that are supplied. o Secure the top of chimney section (C) to the flat bracket, using the screws provided. o Slide chimney section (D) inside of chimney section (C). Then secure the L shaped bracket to the wall, using the same method as you have just used to secure the lower bracket.

  • Page 19: Island Installation (Brt90Iss)

    o Connect a 150 mm ducting hose to a discharge outlet that is suitable for cooking vapours. Please note that the ducting hose is not supplied with the appliance but one can be obtained from the Retail outlet where you purchased your appliance. o The maximum distance between the coupling and your discharge outlet should be 3 metres, with one 90 degree bend.
  • Page 20 NOTICE OF INSTALLATION 1. Before installation, please ensure the area is clean to avoid suction of the remaining bits of broken wood and dust. 2. It cannot share the same air ventilation tube with other appliance such as gas tube, warmer tube, and hot wind tube. 3.

  • Page 21: Completing The Installation

    Completing the installation If you are setting the appliance to recirculation mode, then you should now fit the carbon filters. See the section “Fitting the carbon filter” on page 10 The electrical connection must correspond to the electrical requirement noted on the rating plate, which is placed inside the rangehood.

  • Page 22: Extraction Mode Or Recirculation Mode

    Extraction or recirculation mode? IMPORTANT: You will have to decide prior to installing your rangehood whether to use it in extraction mode or recirculation mode. What is the difference between extraction and recirculation modes? In extraction mode, the stale air will be taken via the grease filter and out of the room via external ducting.

  • Page 23: Troubleshooting

    Where do I go to get parts for my rangehood. o If you need bulbs, filters, or semi-rigid aluminium ducting for your rangehood, please contact the retailer from where you purchased it, or visit www.Baumatic.co.nz/service for more information.
  • Page 24 My rangehood is not working properly. Do not attempt to repair the appliance yourself. If the appliance is not operating correctly please contact an authorised service agent. Go to www.Baumatic.co.nz or phone 0800 M10 HLP / 0800 610 457 to locate your closest service agent.
  • Page 25 Guarantees Acts 1993. 5. That the product was purchased and installed in For Service please visit baumatic.co.nz/service or contact New Zealand; the dealer/retailer from whom you purchased the product 6. That this warranty does not extend to: from or call the 0800 number listed below.
  • Page 26 Imported by Applico Ltd. Private Bag 92900 Onehunga, Auckland 1061, New Zealand Website www.baumatic.co.nz...

This manual is also suitable for:

Brt90ssBrt90iss

Table of Contents