Maintenance; Information And Warnings; General Safety Rules - Delfin D/G 1 Z22 Operating And Maintenance Manual

6.1 Information and warnings

Ordinary maintenance and checking operations required to ensure the vacuum's efficiency are
described in this section,
Any intervention, other than ordinary maintenance operations described herein, which may be
necessary to eliminate faults or failure must be expressly authorized by the manufacturer, to whom the
user must apply always specifying the vacuum's identification data.
In case of problems requiring a broaden repair operation, it is recommended to take the vacuum to the
authorized dealer whose qualified personnel, relying on expertise and knowledge of the OEM's
construction technology, will always be available to timely and properly provide service and assistance.
6.2
. Maintenance operations must only be executed by qualified and trained engineers operating
. in the specific fields required for this machine, as follows:
The person responsible of safety must verify the professional skills and competence of the
aforesaid engineers in-charge of maintenance.
Before authorizing any maintenance operations to start, the person responsible of safety must:
- clear the workplace from unauthorized people;
- ensure that all necessary tools are in good conditions and readily available to the
maintenance operator;
- check that lighting is appropriate and, if necessary, provide for supplementary portable
24 Volt lamps;
- ensure that the maintenance operator is provided with all homologated personal safety devices
required to safely execute the scheduled operation/s (gloves, goggles, safety shoes and so on);
- ensure that the maintenance operator has carefully read the herein manual's instructions and
perfectly knows the vacuum's working system.
Caution!
Before starting any maintenance operation, the maintenance engineer must
machine and execute such operation in non-classified atmosphere, which means in an area
with non potentially explosive atmosphere.
Any operation on the vacuum's engine or other electrical components shall only be executed by the
electrical maintenance engineer, who must be trained for this task and shall also be authorized by the
person responsible of safety.
Always use the specially provided tools for the operation to be executed and check that such tools are in
perfect conditions. Using unsuitable or inefficient or defective tools may cause serious damages and injury.
D/G 1 – D/G 2 Z22

General safety rules

• mechanical maintenance
• electrical maintenance
Edition: September 2005 – Rel. 00
unplug the