Residual Risks; Applicable Directives - Delfin D/G 1 Z22 Operating And Maintenance Manual

2.4

Residual risks

Accurate risk analysis carried out by the manufacturer and filed in the technical documentation of reference,
brought to the elimination of the majority of risks in connection with the use of the Delfin vacuum.
The manufacturer recommends all users to strictly follow the herein instructions, procedures and warnings and
to comply with all applicable laws and safety regulations, including utilization of the safety devices prescribed,
whether installed on the vacuum or to be used or worn by the operator for personal safety.
The residual risks in connection with the Delfin vacuum are the following:
Risks arising from the need to operate with Low voltage.
Complying with the Italian law decree DPR 547/55, Low voltage operations can only be executed by qualified
and trained personnel, after providing efficient double earth insulation.
Risks arising from improper machine utilization in presence of flammable or explosive substances.
The vacuum must not be used in workplaces or environment with dangerous substances such as flammable
dust and/or gas and/or liquids, which may evaporate at ambient temperature and therefore contaminate the
environment.
Risks arising from the vacuum's storage and use in a wet/damp environment.
In order not to compromise the vacuum's efficiency, t is necessary to respect the storage and operating
limits prescribed in the herein section 1.6, Environmental conditions.
Risks arising from misinterpretation of the safety warnings and signs.
With regard to the residual risks and the risk identification, the Manufacturer installs safety markings on the
machines, complying with the laws ruling the signs and symbols to be used. The user must immediately
replace the safety warning signs as they become unreadable or damaged .
Caution!
It is absolutely prohibited to remove the safety warning plates from the vacuum.
The manufacturer declines any responsibility on the vacuum's safety in case of failure to
respect this warning.

Applicable Directives

2.5
.
.
.
D/G 1 – D/G 2 Z22
The vacuum described in the herein manual complies with the following directives:
• EC 98/37 Machinery Directive
• EC 89/336 Electromagnetic Compatibility (EMC) Directive
• EC 94/9 ATEX Directive.
Edition: September 2005 – Rel. 00